Manual Hot Foil Stamping Embossing Machine Leather PVC Printer LOGO
The mold temperature required by professional 3M double-sided adhesive fixed to the hotplate
(Maximum stamping area) according to the size of the hot head
This series of versatile bronzing machine operation simple and can be applied to school authorities, printing, decoration decoration, photographic enlargements unit,
Self printing and hot stamping all kinds of information department in a timely manner, cartons, wine, tickets, etc.,
More belts, bags, shoe machine necessary.
(For reference )
Paper: 85 ~ 120
soft plastic: 75 ~ 85
rigid plastic: 35 ~ 100
soft PVC: 65 ~ 80
Leather: leather indentation 75 ~ 85
Cowhide 120 ~ 150
Synthetic leather leather: 160 ~ 180
One: Cut the mold smaller than the double-sided tape!
Second: the yellow layer of double-sided adhesive behind good
Third: The white paper ripped!
Fourth: other machines to more than 100 degrees!
Fifth: Mold can fit together with the machine!
After the run, the royal mold down, the machine is heated to 200 degrees with a tool shovel down!
First: Mold and Machine fixed (with the yellow layer of double-sided adhesive foil laid on a copper mold, in other machines to more than 120 degrees only to die with the beat for a few
Seconds: like this mold and machine fixed) for the second different materials with different temperature (temperature high-pressure products to a fast start, the temperature of the low pressure to remove slow .